本產品選用多種進口原料，并在各類花崗石材質表面上反復實踐，經獨特的配方后，是一種難得的高性能石材 晶面養護產品。可配合VD-3花崗巖晶硬粉使用,對所有花崗石表面晶面處理,可起到填補,結晶,拋光一體化 的多重功效.該產品操作簡便、效果顯著，可迅速恢復花崗巖天然色澤及光亮。 使用方法: 1、 清理干凈石材表面污漬、臘層，并確保石材表面平整、光滑，若石材表面有劃道或凹凸不平時，視磨損程 度選用不同目數的翻新磨片打磨至石材表面平整、光滑； 2、 清洗或翻新后石材，待表面干燥。（對吸水性高的石材翻新或清潔前可涂抹快干型防護劑） 3、 該產品使用前須搖勻，然后用噴壺噴于石材表面（每次操作面積大約3至5平米）； 4、 將0號或1號鋼絲棉盤于白潔拋光墊上，放置于晶面機的針盤下，勻速地拋磨。 5、 根據石材狀況不同，需進行2至4次的反復操作，即可達到理想的效果。 This product to a variety of imported raw materials, and in all kinds of granite material surface, repeated practice, through a unique formulation, is a rare, high-performance stone crystal face care products. With VD-3 may be hard granite crystal powder used foplane, may serve to fill, crystal, polished integration of multiple effects. The product is easy to operate, results are obvious, can quickly restore the natural color and granite bright. Usage: 1, clean up the stone surface stains, wax layer, and to ensure the smooth stone surface, smooth, if the stone is zon ed Road or uneven surface, the mesh depending he renovation grinding stone to the surface of flat, smooth; 2, cleaning or renovated stone until the s dry. (For high absorbent stone to clean priar Quick-drying protectants) 3, the product shall before use and thenwateri (for each operating area of approximately 3 to 5 square meters); 4, No. 0 or 1, the steel plate in the Bai Jie cotton polishing pads, placed on the crystal face machine needle plate, the uniform manner polishing. 5, according to the different situation of stone, need of 2 to 4 times repeated operations can results.