ZKAJ-303 瓷磚晶硬劑 Tiles crystal hardening agent 特　　點 Features 本產品采用獨特的工藝配方而成，專業用于各類陶瓷拋光磚、玻化磚表面的拋光、保養，可迅速在瓷磚表面生成一層堅硬致密、晶瑩的光亮保護層，填補了瓷磚表面氣孔和微孔，并具有高光澤、高硬度、防污、防滑、綠色環保的優異性能。 This product is made through a unique process prescription, professionally applied to polished tiles used in all types of ceramics, glassified tiles surface polishing, maintenance, a hard and compact surface, glistening bright protective layer can be quickly generated on the surface of tiles, this method compensates the tile surface porosity and microporous, and the product is characterized with high gloss, high hardness, anti-pollution, anti-skid and green excellent performances. 使用方法 How to use 1、 對陶瓷拋光磚表面清潔、去除表面蠟質、污質；表面有劃橫、磨損的時，需用翻新機及專用翻新碟打磨至表面光滑； 2、 等陶瓷拋光磚表面干燥后，使用本品配合瓷磚專用晶硬劑調成糊狀涂于瓷磚地面上； 3、 使用175轉晶面機及3M百潔墊進行拋磨，（每次操作范圍在1平米左右，大約1~2分鐘即可在瓷磚表面上達到晶瑩的鏡面效果。 4、 當瓷磚表面第一次經過本品配合晶硬粉拋光處理后，以后可定期使用本劑進行保養，可保持瓷磚長期晶瑩的鏡面效果。 1. Clean the surface of polished ceramic tiles, remove wax, dirty points on the surface; if the surface is worn or scraped, it is necessary to polish it by machines until the surface becomes smooth; 2. When the surface becomes dry, we should spread this product on the tile surface together with the tile specific crystal hardening agent which has been blended into paste state; 3. The tile surface should be polished by 175 rotating crystal surface machine and 3M cleaning clothes (polish 1 square meter area each time ) , after about 1 to 2 minutes the tile surface will reach glistening mirror effect; 4. When the tile surface has been polished by this product for the first time together with crystal hardening agent, this product can be regularly used for maintenance to maintain the long-term glistening mirror effect of tile surface. 注意事項 Note 請存放于兒童不易觸及之處，如有誤食，請大量飲水并就醫。 若不慎入眼，請立即用清水沖洗。 Please store this product in the place beyond children’s touch, if it is mis-eaten, please drink a bulk of water and see the doctor. If eyes are inadvertently bespattered by the product, please wash with clean water.